Skip to main content

Canon EOS Photo5 Competition

This is one of the most creative competition ever!



From Canon:

Canon Photo5 is a chance to show off your imagination and camera skills. Every years'   competitions inspired some truly outstanding shots.  Here is how it works:

1. Register for your Photo5 box.

2. You will receive your Photo5 box in the mail within 7 working days.

3. The box contains 5 secret objects.

4. Your challenge is to shoot each object in the most creative way that you can.

5. Upload your finished pictures for judging and your chance to win a share in Canon prizes.

You don't have to shoot all five but remember the more you do the better your chance of winning. Only one shot per object can be entered.

Please note Photo5 is open to both professional and amateur photographers so make sure you enter the correct category. Photo5 is only open to Australian residents and entry is limited.

Take your photography to the next level with EOS.


Please go here to register your interest.

Comments

Popular posts from this blog

Box Hill High School Zone

Parents are struggling with moving into a good reputable school for their kid(s). Here is the zone for Box Hill High School.   Good luck with house hunting!

Venus Bay - pipi

Location: Venus Bay, Victoria This is around 2 hours drive from Melbourne. Aim for Bay 1, turn left away from the entrance; or bay 5, turn right away from the entrance. Preparation: Map (see below) Tide Time (Check at Australian Tide Time ) Fishing License (Purchase at Kmart or DPI online ) Container (2-liter per person limit) Sunscreen Drinking water NO digging tools! (hands and feet only) Fun Part – Digging: Best time is the low tide towards the lowest tide. Pipi could be around 5~10 cm deep.

Brivis Heater - Error Code #69

My Brivis HX23 Heater broke down this week.  H01 Code #69.  This code was not even listed in the User Manual!  Searching around the web and here is what I found: Secret Reset: This is not in the User Manual.  On the networker controller press FUNCTION > 1 > 4 keys and the screen will go blank and come back on after 30 seconds, this has rebooted the main PCB and reset the fault code. Use this with caution as too much gas build up could cause an explosion. Use it only after the unit has enough time to air out the gas build up. What is Code #69 or any other unpublished codes?  The best way to find out is to open up the heater unit.   There is a little LCD on the PCB showing what error exactly is. (Note: Opening up the unit may void your warranty.)