Skip to main content

Melbourne Easter Show (25~27 March 2016)

On the 25-27th March 2016 , a special event will take place at Lawson Poole Reserve. This year’s event will feature musical entertainment, food truck, easter egg hunts, a twilight cinema, amusement rides and fireworks displays.
Due to your close proximity to Lawson Poole Reserve, the Melbourne Easter Show Committee would like to make you  aware of the event itself, and let you know that approval was granted by the City of Casey to allow this event to take place.
Event Operating Times
We will begin our operations at Lawson Poole Reserve from the 22 March, please be aware that noise from the reserve may increase.
Our event operating times are from 11:00am-9:00pm Friday 25th, Saturday 26th and Sunday 27th March 2016. Music will be presented from the main stage and Amusement rides will be operating during these times.

Comments

Popular posts from this blog

Box Hill High School Zone

Parents are struggling with moving into a good reputable school for their kid(s). Here is the zone for Box Hill High School.   Good luck with house hunting!

The Bose Soundbar 700 Won't Connect to App

Bose has one of the best speaker sound. I learnt about Bose more than 25 years ago and still a fan.  I bought Soundbar 700 in 2018.  It took me a while to set it up but it has been giving me troubles once a while.  Recently, I was not able to connect Soundbar 700 with my phone.  Done the factory reset on the soundbar, it didn't work. I spent hours reseting everything multiple times and finally I found this article,  https://www.bose.com.au/en_au/support/articles/HC1380/productCodes/bose_soundbar_700/article.html .  Tweaking them all and finally got it to work again. I think the most important setting is to TURN WPS OFF on the router!  Hope it helps.

Brivis Heater - Error Code #69

My Brivis HX23 Heater broke down this week.  H01 Code #69.  This code was not even listed in the User Manual!  Searching around the web and here is what I found: Secret Reset: This is not in the User Manual.  On the networker controller press FUNCTION > 1 > 4 keys and the screen will go blank and come back on after 30 seconds, this has rebooted the main PCB and reset the fault code. Use this with caution as too much gas build up could cause an explosion. Use it only after the unit has enough time to air out the gas build up. What is Code #69 or any other unpublished codes?  The best way to find out is to open up the heater unit.   There is a little LCD on the PCB showing what error exactly is. (Note: Opening up the unit may void your warranty.)