Skip to main content

Melbourne Earthquake?

Image extracted from The Age
Was it an earthquake just now?

Updates:  4.5 earthquake rocked south Victoria (near Moe) at July 20, 2012 7:11pm

News Update: News.com.au or ninemsn or The Age.
Location: Melbourne VIC, Australia

Comments

  1. AnonymousJuly 20, 2012 at 7:21 PM

    I thought it was....

    ReplyDelete
  2. AnonymousJuly 20, 2012 at 7:21 PM

    yes there was, no news yet on the net

    ReplyDelete
  3. AnonymousJuly 20, 2012 at 7:23 PM

    Yep, felt it in frankston

    ReplyDelete
  4. AnonymousJuly 20, 2012 at 7:24 PM

    Yes, can feel that for about 10 secs.

    ReplyDelete
  5. AnonymousJuly 20, 2012 at 7:25 PM

    Yes we felt it in Toora Sth Gippsland.

    ReplyDelete
  6. AnonymousJuly 20, 2012 at 7:25 PM

    I am wondering that too. The whole house shook for several seconds.

    ReplyDelete
  7. AnonymousJuly 20, 2012 at 7:26 PM

    Yes. Felt it in Frankston.

    ReplyDelete
  8. AnonymousJuly 20, 2012 at 7:28 PM

    Yep, felt it in Berwick & friends felt it in Trafalgar more

    ReplyDelete
  9. AnonymousJuly 20, 2012 at 7:28 PM

    Yes, I believe there was. Am in outer Eastern Suburbs

    ReplyDelete
  10. AnonymousJuly 20, 2012 at 7:29 PM

    yep felt it in frankston

    ReplyDelete
  11. jacksonJuly 20, 2012 at 7:29 PM

    felt something too, but very minor, just a tremor. earthquake will be > 2mins

    ReplyDelete
  12. AnonymousJuly 20, 2012 at 7:30 PM

    Yep

    ReplyDelete
  13. AnonymousJuly 20, 2012 at 7:31 PM

    Apparently

    ReplyDelete
  14. AnonymousJuly 20, 2012 at 7:33 PM

    Slight furniture shaking for a few seconds in Sunbury, Victoria.

    ReplyDelete
  15. AnonymousJuly 20, 2012 at 7:36 PM

    I felt it at work while talking to my customer

    ReplyDelete
  16. AnonymousJuly 20, 2012 at 7:37 PM

    I felt it at work

    ReplyDelete
  17. AnonymousJuly 20, 2012 at 7:38 PM

    yup! we felt it in south gippsland, much bigger than the last one.

    ReplyDelete
  18. AnonymousJuly 20, 2012 at 7:41 PM

    Felt it in South Morang

    ReplyDelete
  19. AnonymousJuly 20, 2012 at 7:42 PM

    Yes, confirmed by online news, i felt it in Cranbourne, chair shook and windows vibrated for 5 seconds or so. Not as strong as last month. I'd say 4-5 on the scale at the most.

    ReplyDelete
  20. AnonymousJuly 20, 2012 at 7:48 PM

    I felt it in Burwood

    ReplyDelete
  21. AnonymousJuly 20, 2012 at 8:02 PM

    yep

    ReplyDelete

Post a Comment

Popular posts from this blog

Box Hill High School Zone

Parents are struggling with moving into a good reputable school for their kid(s). Here is the zone for Box Hill High School.   Good luck with house hunting!
Post a Comment
»»»»»»»»»»»»»»»»»»» Read more »»»»»»»»»»»»»»»»»»»

Venus Bay - pipi

Location: Venus Bay, Victoria This is around 2 hours drive from Melbourne. Aim for Bay 1, turn left away from the entrance; or bay 5, turn right away from the entrance. Preparation: Map (see below) Tide Time (Check at Australian Tide Time ) Fishing License (Purchase at Kmart or DPI online ) Container (2-liter per person limit) Sunscreen Drinking water NO digging tools! (hands and feet only) Fun Part – Digging: Best time is the low tide towards the lowest tide. Pipi could be around 5~10 cm deep.
1 comment
»»»»»»»»»»»»»»»»»»» Read more »»»»»»»»»»»»»»»»»»»

Brivis Heater - Error Code #69

My Brivis HX23 Heater broke down this week.  H01 Code #69.  This code was not even listed in the User Manual!  Searching around the web and here is what I found: Secret Reset: This is not in the User Manual.  On the networker controller press FUNCTION > 1 > 4 keys and the screen will go blank and come back on after 30 seconds, this has rebooted the main PCB and reset the fault code. Use this with caution as too much gas build up could cause an explosion. Use it only after the unit has enough time to air out the gas build up. What is Code #69 or any other unpublished codes?  The best way to find out is to open up the heater unit.   There is a little LCD on the PCB showing what error exactly is. (Note: Opening up the unit may void your warranty.)
6 comments
»»»»»»»»»»»»»»»»»»» Read more »»»»»»»»»»»»»»»»»»»