An important step in the toilet training process is to foster your toddler’s desire to be a big kid and to be independent. Huggies Pull-Ups Toilet Training Pants have been designed with this in mind. By showing your child the Pull-Ups pant graphics and characters, they can see that they are more like undies than nappies. This helps to send a clear signal to your child that they are embarking on an exciting new stage of being a big kid.
The “Feel Wet to Learn” Wetness Liner temporarily allows your child to feel the wetness against their skin before drawing it away. This in turn teaches your toddler to distinguish between feeling wet and feeling dry and helps them to learn when they need to go to the toilet.
Location: Venus Bay, Victoria This is around 2 hours drive from Melbourne. Aim for Bay 1, turn left away from the entrance; or bay 5, turn right away from the entrance. Preparation: Map (see below) Tide Time (Check at Australian Tide Time ) Fishing License (Purchase at Kmart or DPI online ) Container (2-liter per person limit) Sunscreen Drinking water NO digging tools! (hands and feet only) Fun Part – Digging: Best time is the low tide towards the lowest tide. Pipi could be around 5~10 cm deep.
My Brivis HX23 Heater broke down this week. H01 Code #69. This code was not even listed in the User Manual! Searching around the web and here is what I found: Secret Reset: This is not in the User Manual. On the networker controller press FUNCTION > 1 > 4 keys and the screen will go blank and come back on after 30 seconds, this has rebooted the main PCB and reset the fault code. Use this with caution as too much gas build up could cause an explosion. Use it only after the unit has enough time to air out the gas build up. What is Code #69 or any other unpublished codes? The best way to find out is to open up the heater unit. There is a little LCD on the PCB showing what error exactly is. (Note: Opening up the unit may void your warranty.)