Skip to main content

Royal Botanical Gardens

The picturesque setting of the Royal Botanic Gardens Melbourne extends over 36 hectares and displays more than 50,000 plants. Diverse plant collections, year-round events, unique tours, and a reputation as one of the world's finest gardens has made the Royal Botanic Gardens one of Melbourne's most popular tourist attractions.


Opening hours

Entry to Royal Botanic Gardens Melbourne is free of charge
Open:
7.30am to sunset every day of the year
Go to The Ian Potter Foundation Children’s Garden for details of opening hours and activities.
For details on opening hours for the Visitor Centre, Tropical Display – Glasshouse, Plant Craft Cottage, The Gardens Shop and Cafes please check out the Open Hours page.

Direction

The Gardens are centrally located approximately 2 km from the centre of Melbourne.
Royal Botanic Gardens Melbourne
Birdwood Avenue
South Yarra, Victoria 3141
Australia (Google map)
For further enquirers phone (03) 9252 2429 or email visitor services.

* Information above was extracted from RBG web site.

Comments

Popular posts from this blog

Box Hill High School Zone

Parents are struggling with moving into a good reputable school for their kid(s). Here is the zone for Box Hill High School.   Good luck with house hunting!

Venus Bay - pipi

Location: Venus Bay, Victoria This is around 2 hours drive from Melbourne. Aim for Bay 1, turn left away from the entrance; or bay 5, turn right away from the entrance. Preparation: Map (see below) Tide Time (Check at Australian Tide Time ) Fishing License (Purchase at Kmart or DPI online ) Container (2-liter per person limit) Sunscreen Drinking water NO digging tools! (hands and feet only) Fun Part – Digging: Best time is the low tide towards the lowest tide. Pipi could be around 5~10 cm deep.

Brivis Heater - Error Code #69

My Brivis HX23 Heater broke down this week.  H01 Code #69.  This code was not even listed in the User Manual!  Searching around the web and here is what I found: Secret Reset: This is not in the User Manual.  On the networker controller press FUNCTION > 1 > 4 keys and the screen will go blank and come back on after 30 seconds, this has rebooted the main PCB and reset the fault code. Use this with caution as too much gas build up could cause an explosion. Use it only after the unit has enough time to air out the gas build up. What is Code #69 or any other unpublished codes?  The best way to find out is to open up the heater unit.   There is a little LCD on the PCB showing what error exactly is. (Note: Opening up the unit may void your warranty.)